General ISDN BRI capabilities
The most important capabilities of ISDN BRI are:
• For line access
- simultaneous voice and circuit-switched data over a single DSL
- B-channel and/or D-channel packet data transmission over a single DSL
- multiple physical terminals connected to a single DSL
- multiple logical devices associated with each DSL
- diverse ISDN-compliant third party terminals (compliant with CCITT, ANSI, ETSI NET-3 and ETS 300 403, INS NET-64, National ISDN-1, 1TR6, Numeris VN2, and EuroISDN standards)
• For trunk access
- MCDN ISDN BRI TIE trunk connectivity
- QSIG ISDN BRI TIE trunk connectivity
- CO/DID trunk connections to local exchanges that support Numeris VN3, 1TR6, ETSI NET-3 and ETS 300 403 (EuroISDN), INS NET-64 (Japan D70), Australia ETSI, and Asia-Pacific protocols
4BRI module applies to CooVox U80, and U100V2 IP Phone systems. 4BRI module has four BRI ports, each port has one LED(LightEmitting Diodes), which is assembled on the mainboard.
The Red LED indicates port status:
> Solid Red= TE Model
The Screen LED indicates port status:
> Solid Screen= NT Model
If the LED is the module is loading failure
Applicable Slot for BRI Module:
Notice:
- New 4BRI module CAN be inserted ONLY to SLOT 2 of CooVox U80,U100V2 and U100V1; CAN be inserted ONLY to SLOT 1 of U50V1.
- Old 4BRI module CANNOT be inserted to CooVox U80 and U100V2.
- If you need use the new 4BRI module on CooVox V1, please adjust the jumper to V1.
BRI Port Jumper Instruction
On ZYCOO 4BRI module, the jumper is on different position for 1/2 port & 3/4 port. The user should do the following to detect which position is applicable for local standard.
1. Connect the BRI module correctly and boot up the device
2. In GUI, set mode for the channels you need to work (Don’t check EC when there’s no EC).
3. Connect the line to 1/2, check if it’s working properly or not
4. When it’s working, then change jumper on 3/4 to 1/2 position
5. When it’s not working, change jumper on 1/2 to 3/4 position
Environmental Operation Information
Temperature: 0-40 degrees Centigrade
Humidity: up to 95%, non-condensing
Physical Dimensions
76x116 Millimeters